壓縮歪度試驗儀參考標準：

1. GB/T 7759-1996 idt ISO 815:1999 硫化橡膠、熱塑性橡膠常溫、高溫和低溫下壓縮長久變形測定

2. ASTM D 395-2008 橡膠性能的標準試驗方法.壓縮長久變形

3. JIS K 6262-2006 硫化或熱塑性橡膠.在常溫、高溫或低溫下的壓縮長久變形測定規格參數

壓縮歪度試驗儀規格參數：

1. 橡膠試樣規格：?28.68，D12.7mm

2. 發泡塑膠試樣規格：L50×W50×D25mm

3. 主機尺寸：約W200×D120×H250mm

4. 主機重量：約11kg

※ 溫度試驗參考：70℃—22hr；100℃—70hr

壓縮歪度試驗儀英文介紹：

Compression And Deformation Tester

Model: SZ-6615

It′s used especially to test the static compression for tuber. Place one standard specimen between parallel flat plates, revolve then compress it a certain range of percentage and then put into the oven under the specified temperature for a certain time period then take it off cooling for 30 minutes to measure its thickness for calculating its permanent deformation rate.
Compression Deformation Rate Formula:
(Uncompressed Thickness - Compressed Thickness)÷(Uncompressed Thickness - Plate Thickness)×100

Ⅰ Test Standard:

1. GB/T 7759-1996 idt ISO 815:1999 硫化橡膠、熱塑性橡膠常溫、高溫和低溫下壓縮長久變形測定

2. ASTM D 395-2008 橡膠性能的標準試驗方法.壓縮長久變形

3. JIS K 6262-2006 硫化或熱塑性橡膠.在常溫、高溫或低溫下的壓縮長久變形測定規格參數

Ⅱ Specifications:

1. Model: SZ-6615

2. Rubber Specimen: ?28.68, D12.7mm

3. Foam Plastic Specimen: L50×W50×D25mm

4. Dimension: W200×D120×H250mm

5. Weight:11kg